Rear track rods for support frame without ARB

Rear tie rod set for Audi Quattro (B2/B3/B4) made of 25 mm thick tube – same size as used in the B Group cars. Equipped with motorsport joints, spacers and locknuts. It enables very precise setting of rear geometry settings.This track rod is for cars without rear anti-roll bar (ARB) in the rear subframe.It’s a must have for track or race use, as the OEM ones give up in extreme conditions changing your geometry setup, while the car is in the corner.All non-OEM parts necessary for the installation are supplied in the kit.What’s included:– One set (two pieces) of rear black tire rods for rear with inox finish– Four motorsport racing tie rod ends (left and right threads)– Steel machined tie rod end adapters to fit stock bearing carriers– Self-locking nuts– Four rubber sealing bootsFeatures:– Works with stock or Audi Sport wishbones and OEM rear support frame with sway bar– 25 mm thick rear tire rods powder painted in black– Inox screws for 22 wrench from each side– Locknuts for securing the motorsport joints– Galvanized tire rod end adapters for fitting bearing carriersFits:– Audi Ur-quattro Late (1983.5+ with no rear sway bar). Please check the picture here.– Audi B2 Coupe/Sedan Quattro without rear ARB– Audi B3 Coupe/Sedan Quattro without rear ARB– Audi B4 Coupe Quattro without rear ARB