THE-Tuner K16/24 Upgrade Turbo Intake Pipes

THE-Tuner air intake pipes are manufactured from pre-bent aluminum tubes. This makes it possible to accomplish very few welds and transition. Being larger diameter then stock RS4 OEM pipes means better performance is possible. The upper tubes have an outer diameter of 70mm and the lower 63mm. A matching reducing silicone hose is included in the set. The K16 / 24 turbochargers use 70mm tubes at the top and bottom. Only in conjunction with THE- manifolds. Intakes feature an air guide Flow-straightener on the lower tubes like the OEM pipes.The fresh air pipes are a push on fit to the compressor housings and seal with the existing O-rings.The fresh air pipes are available for the following turbochargers:K04 OEM RS4/RS6 & TTE600TTE700 / 780 / 880 TTE850 / 950 Other turbochargers on requestBasic information:Outer tube diameter 70 / 63,5mmMaterial aluminumOne set consists of 2x Lower And 2x higher intakes pipes, 4x silicone connectors and 2x 45 degrees 25mm silicone hoseYou will need worm drive clips (JCS High-torque stainless recommended) and new K04 o-rings on turbos with a smear of silicone grease