THE-tuner 102mm intake hose
Delivery ETA information.
UK VAT (20%) is removed at checkout for all EU & Rest of World countries. Simply select destination country from the shipping section and the total will recalculate to remove the 20% UK VAT.
The THE intake hose is specially designed for use in the RS4/S4 B5. The inner diameter is 102mm and can be mounted directly on our large MAF housing. To prevent the hose from contracting, two additional steel rings were used. The other side is made that our 102mm intake Y can be mounted (see picture/red Y). With the help of the adapters, which can be ordered separately, it is possible to install the OEM RS4 MAF and/or the OEM RS4 Intake-Y. If both adapters are installed, this hose can also be used as a replacement for the OEM RS4 intake hose.
This hose will also be used in the future in various other projects from us, such as RS3/TTRS. The THE intake hose can also be universally installed in other engines.
Advantages over the OEM / silicone hose:
More throughput due to larger diameter
More flexible than a silicone hose
The corrugation can compensate for a slight angular misalignment
Two additional steel rings have been inserted to prevent contraction
With the help of our adapters, a wide variety of expansion stages can be realized with it
Inner diameter: 102mm
Total length: 215mm
Angle of the hose: 35° +-
Material of the hose: TEEE (same as various OEM hoses)
Galvanized steel rings
Reducer adapters must be ordered separately as needed - part number can be found below
Universal use - can be used for various self-built intake systems
Scope of delivery:
Intake hose incl. steel rings
Two stainless steel hose clamps
Available sizesRS4/RED , RS4/BLACK , S4/RED , S4/BLACK