Bosch 82mm throttle body machined for RS4 bolt circle with plug
Delivery ETA information.
UK VAT (20%) is removed at checkout for all EU & Rest of World countries. Simply select destination country from the shipping section and the total will recalculate to remove the 20% UK VAT.
This is an original Bosch 82mm throttle body that has been machined by us to fit the OEM RS4 or our HF intake manifold in conjunction with our RS6 cast Y. The intake of our HF manifold is the same as the RS6.
The intake of our HF intake manifold as well as the cast Y (RS6) has been specifically designed for the 82mm throttle body (same as RS6) and in combination achieves the highest possible flow rate with near stock appearance.
Advantages over the OEM RS4 throttle body:
Larger inlet cross section
Lower initial cost
The bolt-on points of the throttle body were subsequently machined so that the bolt circle of the RS4 throttle body is identical
Scope of delivery:
New 82mm Bosch throttle body
Matching connector with pins and body gaskets
Instruction for connector pinout
During installation, the original plug must be removed and the one included in the set must be installed.
As an alternative to repinning we can offer separately an adapter plug (part no. THE-B5 052 01 - see last picture)