Racingline

DSG Cooler for DQ250 Gearbox

SKU VWR29G7250 Stock Order
Available for stock order from Racingline.
Delivery ETA information.
£655.20 €767.17 $817.49 inc. VAT
Added to basket. Click here to view basket.
Please select a version to proceed
Please select a quantity to proceed
Stock Order

DSG Cooler for DQ250 Gearbox

One Version

UK VAT (20%) is removed at checkout for all EU & Rest of World countries. Simply select destination country from the shipping section and the total will recalculate to remove the 20% UK VAT. 

Delivery Information
Share

Description

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only)It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it.Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15 – 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.What’s included in the kitOil cooler mounting bracketsAN10 210 series Nylon braided feed and return lineBillet CNC thermostatic adaptor blockReplacement, low-profile oil/water coolerAN10 10-row oil/air cooler coreFitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbinsThe kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.Part number: VWR29G7250Why fit a DSG Cooler Kit?Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate. Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15 – 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.ApplicationsPlease note, customers are wholly responsible for checking fitment for their vehicle.SKU: VWR29G7250Categories: Arteon 2017-present, Arteon R 2.0 TSI (284 PS) 2017-present, Audi, Brand, Clutch & Drivetrain, DSG Accessories, DSG Cooling, Golf GTI (220 PS) 2013-2017, Golf GTI (230 PS) 2017-present, Golf GTI Clubsport (265 PS) 2016-2017, Golf GTI Performance (230 PS) 2013-2017, Golf GTI Performance (245 PS) 2017-present, Golf GTI TCR (290 PS) 2019-present, Golf Mk7/Mk7.5 2012-present, Golf R (300 PS) 2012-2017, Golf R (300 PS) 2019-2021, Golf R (310 PS) 2017-2019, Leon Cupra 'R' (310 PS) 2017-2018, Leon Cupra 280 (280 PS) 2014-2015, Leon Cupra 290 (290 PS) 2015-2016, Leon Cupra 290 (290 PS) 2018-2020, Leon Cupra 300 (300 PS) 2017-2018, Leon Mk3 2013-2020, Octavia Mk3 (5E) 2013-2020, Octavia vRS (220 PS) 2013-2017, Octavia vRS (230 PS) 2015-2016, Octavia vRS (230 PS) 2017-2020, Octavia vRS (245 PS) 2017-2020, Parts, Passat 2.0 TSI (220 PS) 2015-present, Passat 2.0 TSI 4Motion (280 PS) 2015-present, Passat 2.0 TSI GPF 4Motion (272 PS) 2018-present, Passat Mk6 (B8) 2014-present, Racingline Performance, S3 (300 PS) 2012-2016, S3 (300 PS) 2018-present, S3 (310 PS) 2016-2018, S3 (8V) 2012-2020, Seat, Skoda, Superb 2.0 TSI (220 PS) 2015-present, Superb 2.0 TSI (280 PS) 2015-present, Superb Mk3 2015-present, TT (8S) 2014-present, TT 2.0 TFSI (230 PS) 2014-2018, TTS (310 PS) 2014-2018, TTS (8S) 2014-present, Volkswagen

Related Items