TTE860 RS4 B5 S4 B5 UPGRADE TURBOCHARGERS
Delivery ETA information.
UK VAT (20%) is removed at checkout for all EU & Rest of World countries. Simply select destination country from the shipping section and the total will recalculate to remove the 20% UK VAT.
Product information "TTE860 RS4 B5 S4 B5 UPGRADE TURBOCHARGERS"AUDI RS4 / S4 B5 / A6 C5 ALLROAD 2.7 TTE860 UPGRADE TURBOCHARGERS
Welcome to our TTE860 Stage for the 2.7 T motor, using THE 08 exhaust turbine housings. Developed from our TTE780 series.
TTE780 have been regarded as one of the best RS4/RS6 type hybrids offered anywhere for response and power this TTE860 evolution gives more..
Engineered & Enhanced
TTE860 Turbochargers start life as Genuine RS6 K04 OE units. Engineered and enhanced using in most part BorgWarner components or better. These units offer a turbocharger step to increasing your 2.7T motor performance with huge power potential.
TTE860 has RS4 compressor covers with larger TTE CNC billet inlets that we CNC machine in house to an optimum clearance to allow fitment and maintain the efficiency of a larger highly advanced billet milled 7+7 blade high-pressure compressor wheel. This billet compressor also has very high efficiency. We also give these compressor cover outlets some extra attention porting and polishing the boost discharge outlet to smooth the airflow to the boost pipework for improving efficiency.
The Compressor wheel being a 7 blade billet milled high-pressure anti-surge geometry compressor wheel, features promote greater airflow and pressure using a low inertia wheel that performs like a wheel of even greater size and mass. 7+7 Blade technology enables lower boost threshold giving the user faster spool-up at lower engine speeds while providing the high boost with much less heat for powerful top-end performance.
The THE 08 exhaust turbine housings are CNC milled in-house to allow fitment of a far larger turbine to an optimum clearance for maximum efficiency.
Turbine and shaft being BorgWarner (Porsche) K16 items, measuring with a 49.1mm Exducer and with a 55mm Inducer, compared to RS6 K04 with an Exducer 44.4mm & 50mm Inducer that we use on our smaller stages. We also give the K16 turbine a clip. Clipping reduces the blade area thus increasing gas flow and so reduce backpressure and lowering exhaust gas temperatures, allowing safer higher boost level's. Curving the clip is to alleviate stress from the process. This clipping also gives a secondary advantage of removing some material, lightening the turbine thus reducing the rotational mass improving moment of inertia and spool.
Special profile 360 deg TTE developed high-performance motorsport journal bearing system are fitted, to remain durable at higher loads with no loss in transient response.
Actuators used are uprated sprung OE units fitted with our reinforced clamps for trouble-free operation. These also can also be modified/set to customer needs and specifications.
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.
Genuine BorgWarner RS4 compressor housings and key components,Ported discharge outlets and coated covers in Hi-Temp black paintTHE 08 exhaust housings TTE CNC modified Genuine BorgWarner Latest Billet compressor geometry 47.6mm Inlet Genuine BorgWarner K16 Turbine, Special Curved Clipped & lightenedTTE Reinforced Motorsport bearing systemGenuine BorgWarner Modified reinforced and synchronized actuators, coated in Hi-Temp red paintTTE CNC Billet 58mm inlets (Viton O-Ring seals inc)Installation as original RS4 K04 (with regard to oil and water line, all else see bellow)700+ PS Capable on 99ron Single parts finely balanced then components assembled and core high-speed VSR balancedSupplied with a balance test result documentProven TheTurboEngineers qualityMade in GermanyPrice shown is for a PAIR of turbochargers Reconditioned Upgrade Turbo - Send To TTE is based on you sending good condition K04 RS4 OE Turbochargers
Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.
PLEASE NOTE : IT IS RECOMMENDED THAT ANYONE CONSIDERING FITTING THIS TURBO UPGRADE HAS THE-RS4 /S4 B5 UPGRADE OIL PUMP INSTALLED. THIS IS REQUIRED FOR WARRANTY.
These turbochargers use K04 RS4 B5 compressor housings with 58mm inlets. THE turbo intake pipes and exhasut manilfolds are recomended for easy fittment
Available sizesSquare Actuator , Rounded Actuator